Seite 1
Mini Tor Sportgeräte 2000 GmbH Mini goal Schinkelstraße 15 31137 Hildesheim Artikel-Nr. / Item No. Größe / Size Alt / old Neu / New B00185 1-04-021 120x80cm B00186 1-04-022 180x120cm Hinweis! Note! Bevor Sie mit der Montage beginnen, prüfen Sie Before you start assembly, you must verify all die Sendung auf Vollständigkeit und Unversehrt-...
Seite 2
Zubehör für 1: Accessories for 1: Pos.Nr. Teil Stck. Bezeichnung Artikel-Nr. Anmerkung Pos.No. Part Pcs. Description Item-No. Comment Torpfosten Element links geschweißt mit Netzbügel Goal post element left welded with net hanger Torpfosten Element rechts geschweißt mit Netzbügel Goal post element right welded with net hanger Torlatte 1150mm Für Minitor 120x80 K-01538...
Seite 3
Pos.Nr. Teil Stck. Bezeichnung Artikel-Nr. Anmerkung Pos.No. Part Pcs. Description Item-No. Comment Senkschraube DIN 10642 - M8x16 Countersunk screw DIN 10642 - M8x16 Baugruppe aus 7.1 und 7.2 Assembly from 7.1 and 7.2 Für Minitor 120x80 For mini goal 120x80 Bodenrahmenrohr (lang) Ground frame tube (long) Für Minitor 180x120...
Seite 4
Pos.Nr. Teil Stck. Bezeichnung Artikel-Nr. Anmerkung Pos.No. Part Pcs. Description Item-No. Comment Baugruppe aus 8.1 und 8.2 Assembly from 8.1 and 8.2 Für Minitor 120x80 ZB-00006 For mini goal 120x80 Versteifungsstrebe (kurz) Stiffening strut (short) Für Minitor 180x120 ZB-00008 For mini goal 180x120 Rohr 1242mm Für Minitor 120x80 K-01540...
Seite 5
Pos.Nr. Teil Stck. Bezeichnung Artikel-Nr. Anmerkung Pos.No. Part Pcs. Description Item-No. Comment Linsenkopfschraube DIN 7380 - M6x60 K-02093 Lens head screw DIN 7380 - M6x60 KU-Kappe K-01648 PE cap Für Minitor 120x80 For mini goal 120x80 Netzhaken 5-00-006 Net hook Für Minitor 180x120 For mini goal 180x120 SW 4mm Sechskantschlüssel...
Seite 6
Pos.Nr. Teil Stck. Bezeichnung Artikel-Nr. Anmerkung Pos.No. Part Pcs. Description Item-No. Comment Montageschlüssel K-01683 Mounting key 5 lfm Für Minitor 120x80 5 rm For mini goal 120x80 PE-Schnur PE string 6 lfm Für Minitor 180x120 6 rm For mini goal 180x120 Hering 22cm lang K-00180 Tent peg 22cm long...
Seite 7
Benötigte Hilfsmittel: Required tool: Pos.Nr. Bezeichnung Anmerkung Pos.No. Description Comment Zange Tongue Schnittgefahr an Sicherheitshandschuh den Profilen Safety gloves Danger of cutting on the profile Sicherheitsschuhe Safety shoes M-00035-Montageanleitung für Revision 4 vom 26.01.2021 Seite 7 von 13 zerlegbare Minitore 0185, 0186 Modell- und technische Änderungen sowie Irrtümer vorbehalten.
Seite 8
Arbeitsschritte zur Montage Working steps to assembly Zwei Senkkopfschrauben M8x16 (6) Loosely screw two countersunk head lose in den Nutenstein doppelt M8 (4) screws M8x16 (6) into the slot nut schrauben. double M8 (4). Zwei Verbinder (5) von unten und oben Place two connectors (5) from below auf die Senkkopfschrauben (6) legen.
Seite 9
Den vormontierten Verbinder bis ca. zur Push the pre-assembled connector up Hälfte in die Profilnut des Torpfosten to about halfway into the profile groove Elements schieben. of the goal post element. hintere Profilnut rear profile groove vordere Profilnut front profile groove Hinweis: Der Nutenstein sitzt in der Note: The slot nut sits in the rear profile hinteren Profilnut.
Seite 10
Die Torlatte (3) auf den heraus- The crossbar (3) slide on the lookout schauenden Verbinder schieben. connector. Senkkopfschrauben fest The countersunk screw M8x16 (6) anziehen. tighten. Bodenrahmenrohr Put the ground frame tube (7) in the Öffnung Torpfosten Elements openings of the goal post element (1) stecken (1) und mit der Linsenkopf- and screw it with the lens head screw schraube M8x50 (9) verschrauben.
Seite 11
Am anderen Torpfosten Element die On the other goal post element repeat Schritte 1 bis 4 wiederholen. the step 1 to 4. Versteifungsstrebe oben The stiffening strut (8) positioning at the zwischen beiden Netzbügel top between the both net hanger and positionieren und mit den Linsen- tighten this with the lens head screw kopfschrauben...
Seite 12
Auf die Torpfosten Elemente die KU- Impact the KU caps (11) on the goal Kappen (11) mit einem Gummi-Hammer post elements with a rubber hammer. einschlagen. Netzhalter (10) 90° Turn the net holders (10) supply 90°, verdrehen, besten preferably with a montage key (15) Montageschlüssel (15) alternativ auch alternatively a wrench AF19.
Mit den Heringen (17) durch die Using the tent pegs (17) through the Bohrungen Torpfosten holes in the goal post elements (1/2), Elementen (1/2), das Tor vor dem secure the goal from tipping over Umkippen sichern Wartungshinweise Maintenance instructions • Einmal im Monat müssen die Schraub- •...