Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
Possible Cause
a) ON/OFF switch damaged.
b) ON/OFF cable damaged.
c) ON/OFF relay damaged.
d) Fuse blown.
Motor doesn't start
e) Motor burnt.
Machine gets slower
Too much pressure put on the workpiece.
during work.
Sanding belt comes off
Belt does not run straight.
the drive pulleys.
The wood gets burnt
a) Sanding disc or belt covered with grease.
during sanding.
b) Excessive pressure on workpiece.
14 english
Trouble shooting
Help
a-d) Replace all damaged parts before you
e)
Reduce the pressure on the workpiece.
Reset the track.
a) Replace disc or belt.
b) Reduce pressure on workpiece.
use your machine again.
Contact your local service centre. Every
attempt to carry out a repair, can be
dangerous if it is not done by skilled
personnel.
Werbung
Inhaltsverzeichnis
Fehlerbehebung
