Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ARGOS through-beam photo switch
!
large Range
!
dual power supply
!
transmitting channel selectable
!
insensitive against ambient light
!
fully epoxy resin filled
!
high degree of protection
!
direct mounting, vandalism protected
!
nonwearing semi-conductor relay
!
soiling indication
!
easy adjustment
Technical Data
range
0,5...20m
operating voltage 10...40VDC
10...30VAC,
current consump. transmitter typ. 10mA
receiver
typ.10mA
type of light
IR, modulated
aperture angle
±10°
approx.
output
semi-conductor relay,
short-circuit protected,
potential-free NOC
switching power
max. 40VDC,
max. 100mA
type of switching light on, output closed with
free light beam
response time
<100ms, detection of light
beam interruption
output
switches with drop-out delay of
100ms if the light beam is free
Functional description
The ARGOS is designed for the direct mounting in profile housings.
Due to the big aperture angle a safe function is
assured at all times. With the M25x1.5 design the
Argos matches with standard cable gland sizes. The
high degree of protection can be obtained when
mounted with the provided seal.
®
Sensoric GmbH Berlin ©
www.witt-sensoric.de
Declaration of conformity
EMC directive 2014/30/EU
EN 61000-6-2 and EN 61000-6-3
output resistance max. 35Ω
indications
transmitter g reen LED= i n operation (wire side),
receiver
red LED= l ight beam
interrupted, (front),
flashing= c ritical function
reserve (e.g. soiling)
type of connection hard wired
3x0.25mm² transmitter,
5x0.25mm² receiver
housing material PC2805 RF, IR transparent,
cover, nuts, seal
degree of protection IP67 according to EN60529,
fully epoxy resin filled
operating temp.
-20...+75°C
storage temp.
-20...+75°C
size
M25x1,5x55mm³
With the integrated second transmission channel a
second light-stretch can be obtained without the two
interfering with each other. For a longer life of the
sensors an electrical potential-free closing contact is
being used which is nonwearing and short-circuit
protected.
®
Connection scheme / channel selection
U +
brown
B
GND/0V
blue
black
channel selection 1
green indication LED, illuminated with power supplied
U +
brown
B
blue
GND/0V
channel selection 2
black
red indication LED, illuminated with light beam interrupted, flashing when soiled or out of alignment
Size
®
page 1
Sensoric GmbH Berlin ©
Transmitter 1
Receiver 1
Transmitter 2
Receiver 2
Accessories
APG-AR
housing for surface mounting of the ARGOS
photo switches, material black plastic
Material: PA6 GF15
Ordering details
APG-AR
315919
www.witt-sensoric.de
GB
brown
U +
B
blue
GND/0V
pink
channel selection 1
yellow
output
grey
max. 100mA
brown
U +
B
blue
GND/0V
pink
channel selection 2
yellow
output
grey
max. 100mA
page 2
Werbung
