Intenso Mobypack 3000 Bedienungsanleitung Seite 13

The battery level will be displayed through Status LED (2) when the
button is pressed briefly:
To charge your iPad, iPod, Smartphone or similar devices, please
connect it to the corresponding port (3, 4, 5). Up to three devices can be
charged at the same time.
SmartCharge
Smart Charge for rapid charging in conjunction with Apple devices:
The Intenso Mobypack charges devices based on their
specifications. The total charging current is limited to 2.1A.
The priorities of charging ports are as follows:
1. Apple – 30-pin Cable (3) max. 2.1 A
2. USB Port (4) max. 1 A
3. Micro USB Cable (5) max 1 A
If more than one device is connected, and the total
charging current of 2.1A has been exceeded, the charging
current will be distributed based on this prioritisation to
avoid overloading the Intenso Mobypack.
Note:
It is possible to charge Mobypack and also charge the connected devices
simultaneously from Mobypack.
5 LED
4 LED
3 LED
2 LED
1 LED
Page 4 of 8
81 - 100%
61 - 80%
41 - 60%
21 - 40%
0 - 20%
EN