1 General
This accessory is used for wall mounting CTC Combi-
Air 6/8/12.
For more information regarding set-up and pipe connec-
tions, see the description in the Installer Manual for
CombiAir 6/8/12.
■
Noise from the compressor or fan can be transferred
to the bracket.
■
Install with its back to an outside wall, ideally in a room
where noise does not matter, in order to eliminate
noise problems. If this is not possible, avoid placing it
against a wall behind a bedroom or other room where
noise may be a problem.
■
Wherever the unit is located, walls to sound sensitive
rooms should be fitted with sound insulation.
Caution
For assembly, see the end of this manual.
Miscellaneous
To install this product, 2 x 90° angle connectors (G1")
are required. One side with an external thread, the other
with an internal thread.
2
English
Contents
1 x wall bracket
2 x bottom stays
12 x washers Ø 10.5 mm
4 x washers Ø 9 mm
2 x spacer screws
Technical specifications
CTC Wallbracket CombiAir
Width
Weight
Part No.
2 x wall stays
12 x bolts M10
4 x vibration dampers
M12/M8
4 x nuts M8
mm
1 245
kg
7,6
589341301
CTC Wallbracket CombiAir | GB