Herunterladen Diese Seite drucken

Werbung

140
35°
(5 33/64")
L. 600 mm
(1' - 11 5/8")
69
(2 23/32")
171
(6 47/64")
Ø45
(Ø1 49/64")
Ø20
(Ø25/32")
Ø33
(Ø1 19/64")
MIL75
Ø40
(Ø1 37/64")
Ø45
(Ø1 49/64")
Ø35
(Ø1 3/8")
Intertek
Portata aeratore 5 l/min / 1.3 gpm, risparmio idrico
Flow rate aerator 5 l/min / 1.3 gpm, water saving
MANUTENZIONE / MAINTENANCE
HCl
NON UTILIZZARE
HFl
DO NOT USE
NaClO
G 3/8"
UTILIZZARE
PH
TO USE
7
Questi disegni sono proprietà di CEADESIGN SRL s.u. pertanto non potranno
essere utilizzati e/o comunicati a terzi, anche in forma parziale, senza preventiva
autorizzazione. CEADESIGN SRL s.u. si riserva il diritto di apportare modifiche ai
disegni al fine di migliorare il prodotto.
CEADESIGN SRL s.u. has the property rights on these drawings, therefore they
cannot be used and/or transferred to third party, even in partial form, without any
prior authorization. Furthermore CEADESIGN SRL s.u. reserves the right to apply
any change to these drawings in order to upgrade the product.
_ REV10
CEA DESIGN STUDIO
MIL75/MILO360
AISI 316/L STAINLESS STEEL
Miscelatore 2 fori con bocca
di erogazione girevole
Two-hole mixer with swivelling
spout
acido clorico e muriatico
cloric and muriatic acid
acido fluoridrico
hydrofluoric acid
ipoclorito di sodio
chlorine bleach
sapone a PH neutro
neutral PH soap
ceadesign.it

Werbung

loading

Inhaltszusammenfassung für CEA MILO360 MIL75

  • Seite 1 MIL75 _ REV10 Ø45 35° (Ø1 49/64”) (5 33/64”) CEA DESIGN STUDIO Ø40 (Ø1 37/64”) Ø20 Ø45 (Ø25/32”) (Ø1 49/64”) MIL75/MILO360 AISI 316/L STAINLESS STEEL Miscelatore 2 fori con bocca di erogazione girevole Ø35 Ø33 Two-hole mixer with swivelling (Ø1 3/8”) (Ø1 19/64”)
  • Seite 2: Installation Warnings

    MIL75 _ REV10 H (mm) AVVERTENZE DI INSTALLAZIONE L’altezza ottimale di installazione del prodotto si determina in base all’altezza dell’utente e del lavabo. 5 l/min La rappresentazione ha valore puramente indicativo. 1.3 gpm INSTALLATION WARNINGS Each individual product has to be installed and adjusted to suit the user’s and the washbasin height.
  • Seite 3 MIL75 _ REV10 AVVERTENZE TECNICHE Risciacquare bene le tubazioni prima del montaggio ed evitare sbalzi di pressione fra i raccordi d’acqua fredda e d’acqua calda. In caso di pressioni statiche superiori a 5 bar si raccomanda l’installazione di un riduttore di pressione per evitare danni alla cartuccia.
  • Seite 4 MIL75 _ REV10 RICAMBI / SPARE PARTS RICA001 Aeratore / Aerator 5 l/min / 1.3 gpm RICS014 Kit di fissaggio / Fixing kit Chiave aeratore / Key for aerator RICS249 AERATORI SU RICHIESTA / AERATORS ON DEMAND Aeratore / Aerator 1,9 l/min / 0.5 gpm RICA055 RICA056...
  • Seite 5 MIL75 _ REV10 RICAMBI / SPARE PARTS RICS244 RICM001 KD/Z/P/X - S/L* RICB027 Carter / Carter KD/Z/P/X - S/L* RICC002 Cartuccia / Cartridge RICC023 Adattatore cartuccia / Cartridge adapter RICF010 Flessibile / Hose RICH002 Ghiera / Sleeve RICM001 Maniglia / Handle RICR029 Rosetta / Rosette RICH002...

Diese Anleitung auch für:

Milo360 mil74