Herunterladen Diese Seite drucken

Aseko 12086 Bedienungsanleitung

Wasserstandfühler

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

BEDIENUNGSANLEITUNG
WASSERSTANDFÜHLER
DE
P R E S S U R E L E V E L S E N S O R
Hydrostatic Levelmeter
Compact hydrostatic levelmeter based on Silicon tenzometric sensor and diagnose electronic in resis-
tant teflon case. Connecting cable contains capillary tube inlet of sampling atmospheric pressure.
Front part of the probe is covered by removable cover protecting membrane against mechanical dam-
age. There are no adjustable items on the Levelmeter..
The probe can be hanged to the pool botom, acumulating tank or skimmer by the wiring cable. The wireing
cable contains atmospheric pressure sampling tube that should be free of obstructions and opened to the
atmosphere by its free end. The levelmeter is suitable for all types of pools. Its standard measuring range is
2 m. According to special needs can be modified up to 100 m. Levelmeter is connectable to ASEKO controller
line ASIN AQUA: Home, Oxygen, Salt, Profi, using pool water level regulation output.
w w w.aseko.com
EN
1

Werbung

loading

Inhaltszusammenfassung für Aseko 12086

  • Seite 1 The levelmeter is suitable for all types of pools. Its standard measuring range is 2 m. According to special needs can be modified up to 100 m. Levelmeter is connectable to ASEKO controller line ASIN AQUA: Home, Oxygen, Salt, Profi, using pool water level regulation output.
  • Seite 2 Anschlussplan des Zubehörs ENERGIEVER- SOGUNG 230 V ~ 50 Hz T125mA Besgoventil Stecker 19 Besgoventil 18 Solenoid-Nachfüllen Solenoidventil Stecker 17 Heizungrelais Heizungrelais T800mA Hilfskontakt Geschaltet – geschlossen vom Rollo Geöffnet – offen Wasserstand- Wasserstandmesser messer Stecker Durchflussmesser Wasserthermometer Außenluftthermometer Externe display Externe RS 485 display...
  • Seite 3 You must keep the minimum diameter 30 cm when rolling up the excess cable! It is not recommended to shorten or mechanically modify the cable. Wasserstandmesser #12086 • It is necessary to insert the probe to protection pipe housing, behind any obstacle or as far as possible from the inlet at pools with swirl at the inlet water.