Herunterladen Diese Seite drucken

Glas Italia BISEL consolle BIS03 Montage- Und Bedienungsanleitung Seite 5

Werbung

ITALIANO
step 1. Segnare sulla parete la quota H.
step 2. Svitare la staffa metallica dalla consolle.
step 3. Avvitare la staffa metallica alla parete
all'altezza precedentemente segnata, assicurandosi
che sia perfettamente orizzontale.
step 4. Avvitare saldamente la consolle alla staffa
metallica.
ENGLISH
step 1. Mark the height H on the wall.
step 2. Unscrew the metal bracket from the console.
step 3. Screw the metal bracket to the wall at the
previously marked height, and make sure that it is
perfectly horizontal.
step 4. Screw firmly the console to the metal bracket.
FRANÇAIS
step 1. Marquez la hauteur sur le mur.
step 2. Dévissez le support en métal de la console.
step 3. Vissez le support en métal au mur à la hauteur
indiquée précédemment, en s'assurant qu'il soit
parfaitement horizontal.
step 4. Vissez la console fermement sur le support
en métal.
DEUTSCH
step 1. Markieren Sie die Höhe H an der Wand.
step 2. Schrauben Sie die Metallhalterung von der
Konsole ab.
step 3. Schrauben Sie die Metallhalterung auf der
bereits an der Wand markierten Höhe und achten Sie
darauf, dass sie waagerecht ausgerichtet ist.
step 4. Schrauben Sie die Konsole fest an die
Metallhalterung.
ESPAÑOL
step 1. Marcar en la pared la cota H.
step 2. Desatornillar el soporte metálico de la consola.
step 3. Atornillar el soporte metálico a la pared
a la altura ya marcada, asegurandose que sea
perfectamente horizontal.
step 4. Atornillar firmemente la consola al soporte
metálico.
ATTENZIONE
Nel maneggiare i componenti in
cristallo evitare urti e non appog-
giarli su superfici che possano
causare scheggiature o graffi.
ATTENTION
When handling glass components,
please avoid shocks and do not lay
them on surfaces that could cause
chips or scratches.
ATTENTION
En maniant les composants en
cristal éviter les heurts et ne pas
les appuyer sur des surfaces qui
puissent causer des ébréchures ou
des griffures.
ACHTUNG
Während der Handhabung der
Glasbestandteile vermeiden Sie
Stöße und achten Sie darauf, sie
nicht auf Oberflächen abzustellen,
die diese zersplittern oder verkrat-
zen könnten.
ATENCIÓN
Al desplazar las piezas de cristal,
evitar choques y evitar apoyarlas
sobre superficies que puedan crear

Werbung

loading