These short instructions provide all the information you need for mounting, commissioning, the safe operation and disassembly of the IZ17E. The short instructions must be available in a legible condition and complete version in the vicinity of the device.
Angaben in mm / Specifications in mm Schalttafelausbruch DIN IEC 61554-96x48 / Panel cut out DIN IEC 61554-96x48 x 45 -0/+0.8 -0/+0.6 Frontplattendicke / Front panel thickness 1.00 – 8.00 Typ / Type A (mm) B (mm) IZ17E-XXX-6-XX.X-0 IZ17E-XXX-6-XX.X-1 IZ17E-XXX-2-XX.X-0 IZ17E-XXX-2-XX.X-1...
4.2 Sensor / Sensor Angaben in mm / Specifications in mm Abstand Sensor - Band / Typ / Type Distance Sensor - Tape IZ17E-XXX-X-XX.X-X max. 0,8 mm / 0.8 mm IZ17E-XXX-X-XX.X-X-P5 max. 2,5 mm / 2.5 mm Wichtig: Der Abstand zwischen Sensor und Aktive Fläche /...
Diese Taste aktiviert die einstellbaren Versatzmaße / Tool Offset Switchover between the adjustable Tool-Offsets Umschaltung im Inch-Betrieb Inch-Anzeige / Bruchdarstellung (1/64, 1/32, 1/16), Dezimal 0,001 Switchover during Inch mode Inch display Fraction display (1/64, 1/32, 1/16), Decimal 0,001 außer Version IZ17E-xxx-x-xx,x-x-L1 / except version IZ17E-xxx-x-xx,x-x-L1...
Seite 7
7.2 Parameterebene / Parameter Level Parameterebene aktivieren / Für ca. 3 Sekunden betätigen / Change to program mode Hold for 3 sec. to enter program mode Parameter anwählen / Taste einmal betätigen / Select parameter Press one time Dekaden Anwahl / Taste einmal betätigen / Select decade Press one time...