BALDR B0359STHR Bedienungsanleitung Seite 6

INSTALLATION
Remove the cell battery's Insulating strip ,then plug the adaptor to a
powered outlet .
SETUP
When power on or reset, LCD will full display for 3 seconds
with "BI" sound. Then display real Indoor temperature&
humidity, and default date & time with 100% backlight
brightness.then it will enter into DCF signal receiving window.
Default time: 0:00
DCF Signal Receiving
1. After power on, it will start searching radio signal for 7 minutes with
the antenna symbol "
2. Once signal received, the main unit will display the received
time/month/date/weekday with symbol "
3. Daily RCC signal receiving: there are regular radio signal receiving
at 1:00AM,2:00AM, 3:00AM, 4:00AM, 5:00AM each day. It starts
receiving signal at 1:00AM everyday. For each day, once signal
received at any one receiving time, it will stop receiving signal
that day.
4. Manual receiving: press and hold " RCC " button to enter RCC
signal receiving.
5. During receiving, press " RCC " button to exit RCC receiving.
Notes:
During receiving , except for the top button and " RCC " button, the
other buttons don't workable.
Default date: 2020.06.15
" displaying on screen.
6
" displaying on screen.