Charging Battery - Amewi Piper J-3 Cup Bedienungsanleitung

Charging state:
1. The red LED lights up when the charging cable is connected to a USB socket.
2. The red LED is off during the charging process.
3. If the red LED lights up, the charging process is complete.
If you use a smartphone charger, make sure that the output power does not exceed 2A.
Indication-LED
Red lights up
Not connected or charging
completed
Battery Type Specification
Lithium Polymer 3,7V 500mAh/25C

CHARGING BATTERY

Connect the USB charging cable to a USB socket on a PC, laptop or
smartphone charger. Then connect the flight battery to the charging
cable.
Always charge the battery under supervision.
Charge the battery on a fire-proof surface or better in a LiPo charging
case.
Make sure that the polarity is correct when connecting, otherwise the
battery will be irreparably damaged.
Red lights off
Charging
BATTERY SPECIFICATION
Usage Duration
Flight time up to 25 Minutes
BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL PIPER J-3 CUP
Charging Cable specification
Input
0,5A 500mAh x 1
Charging time
Ca. 60 Minutes at 0,5A charging
current
Current Voltage
4,2 ± 0,03V
25