Samsung AllShare Cast Dongle EAD-T10 Bedienungsanleitung Seite 9

• PIN code method (complete steps within 30 seconds)
On the mobile device, launch AllShare Cast or Screen Mirroring. The monitor
displays the AllShare Cast Dongle's name. Tap and hold the same name from
the list that is displayed on your mobile device. Check the PIN code displayed
on the monitor, and enter the PIN code on your mobile device.
3-2
To connect to a previously used device (complete steps within 2 minutes):
On the mobile device, launch AllShare Cast or Screen Mirroring. The monitor
displays the AllShare Cast Dongle's name. Select the same name from the list
that is displayed on your mobile device.
4
When the connection is complete, the monitor displays the mobile device's
home screen.
• The screen aspect ratio on your device should be identical with that of the
monitor. Otherwise, part of displayed screen may be cut off. For better picture
quality, set the screen aspect ratio on your monitor to fit its original screen or
select the auto aspect ratio setting manually. If auto aspect ratio setting is not
available on your device, some parts of screen can be cut off.
7