peerless-AV ACCD-REM02 Handbuch Seite 6

Controlling Devices and Programming using IR Learning
To Control Device:
1. Press and release the desired device button
[TV, SPK, AUX1, AUX2]. The button of the
selected device will blink twice. After that, all
buttons will operate with the selected device's
[TV, SPK, AUX1, AUX2] code.
2. The selected device's button illuminates when
usable keys are pressed.
3. Unusable keys will blink twice quickly and turn
off.
To Program Using the IR Learning:
1. Press and hold the [AUX1, AUX2] button and
the [OK] button for 3 seconds then release.
All source buttons will illuminate briefly and
then will only highlight the AUX1 or AUX2,
depending on which chosen.
2. While the button of the selected device blinks
slowly (timeout: 60 seconds), press the button
you want to program on your Peerless-AV
remote. The button will be programmable for
30 seconds.
3. On your devices original remote, press the
button you want to assign to your Peerless-AV
remote (maximum 5cm between remotes).
4. If successful, the device button [AUX1, AUX2]
will blink 3 times slowly.
5. If unsuccessful, the device button [AUX1,
AUX2] will blink 3 times quickly and
automatically retries learning.
6. To program additional buttons, repeat from
step 2.
7. Press the selected device button [AUX1,
AUX2] to finish Learning mode. The device
button will blink 3 times.
TV/SPK
TV
1
4
7
•
MUTE
VOL
6
POWER
SPK AUX1 AUX2
2 3
5 6
8 9
0
LAST
OK
MENU
INPUT
CH
INFO
EXIT
GUIDE
2020-05-05 180-9140-1