Main Technical Specifications; Specification; Worthy Information - Lacor Kaldi Gebrauchs- Und Instandhaltungsanleitung

MAIN TECHNICAL SPECIFICATIONS

MODEL:
VOLTAGE:
POWER:
CAPACITY:
DISPENSING LEVELS:
GRINDING LEVELS:
SIZE:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the electric grinder.
We recommend all installation, operating and safety instructions appearing in this manual to be
read before installation or operation.
Electric grinder is a product of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance and optimum performance. Every unit is
thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug electric grinder into a properly grounded electrical
outlet of the correct voltage, size, and plug configuration. If
the plug and receptacle do not match, contact a qualified
electrician to determine the proper voltage and size, and
install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit
from the power source and allow to cool before performing
any maintenance.
3.- For safe and proper operation, the unit must be located at a
reasonable distance from combustible walls and materials.
30

WORTHY INFORMATION

Keep these instructions for future reference.
WARNING
!
69385
220-240V; 50/60 Hz
200 W
200 g (grains)
100 g (ground)
12
19
15,2x21x26 cm
1,85 Kg