Ibiza sound UHF10A Bedienungsanleitung Seite 4

DUAL CHANNEL RECEIVER
1. Volume knob: To adjust the volume of the receiver
2. Display
3. "AF" audio level indicator: Shows the wireless system audio signal level
4. "RF" signal indicator: Glows when the receiver receives an RF signal from the transmitter.
5. Power switch: Powers the receiver ON & OFF.
6. Antenna A/B
7. XLR balanced output jack: Connect the audio cable from this jack to the input port of an amplifier, mixer.
8. 6.35mm audio output jack: Connect the audio cable from this jack to the input port of an amplifier, mixer, etc.
9. Power jack: Connect the AC/DC adaptor to the receiver.
FOUR CHANNEL RECEIVER
1. Power Button: Power ON/OFF the receiver.
2. Power Indicator: Indicate the power ON/OFF.
3."AF"Audio Level Indicator: Indicate the wireless system audio signal level.
4. Volume Knob: Adjust the volume output of receiver.
5."RF" signal Indicator: It glows when the Receiver receive RF signal from Transmitter.
6. Antenna A/B.
7.1/4" Audio Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer.
8. XLR Balanced Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer.
9. Power Jack: Connect the AC/DC adapter to receiver
Front panel
Rear panel