Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Setup Instructions
To ensure reliable and save operation of the unit, you should carefully read this instruction and setup-manual.
To prevent overheating, make sure that the cabinet and / or the rack is sufficiently ventilated and that there are no
other heat sources in the immediate vicinity.
For trouble-free operation the ambient temperature of 30° C must not be exceeded.
Please do not expose unit to direct sunlight or place it near a heater. Avoid splashing water, high humidity and
extensive dust and vibration.
Should a foreign object or fluid get inside the unit, be sure to disconnect power immediately and have unit checked
by an authorized dealer.
Do not open unit, as otherwise warranty will be void.
Before switching the amplifier on, the master control as well as all input controls are completely turned to it's
utmost counterclockwise positions.
Incorrect positioning of these level controls can lead to sudden outburst of sound, that can damage speakers and
/or amplifier.
1. Controls and Connectors
1.1 Frontansicht
1 Display
2 FM/MW Selector
3 Mono/Stereo Selector
1.2 Rückansicht
8 AM-Antenna-Connector
9 FM-Antenna-Connector
2. Tuner Operation
2.1 Scan
A brief push of the "Scan"-keys (6) increases or decreases the receiving frequency.
A longer push (min. 1,5s) starts a scan. The scan stops at the next station.
2.2 How to Store a Station
- Choose the desired station.
- Press "Store"-key (4) and select the desired Preset by use of the keys (5).
- To finally save the selected station press the "Store"-key (4) again.
- The storage process is finished now and you can store the next station.
- You can recall the stored stations with the "Preset"-keys (5).
3.3 Mono/Stereo Selectors
The "MO/ST"-key (3) allows changing into mono receiving mode in order to avoid noisy reception of weak FM
stations.
4 Store-Key
5 Presets
6 Scan
10 Audio-Output
11 Mains-Connector
7 Mains-Switch
Werbung
