Herunterladen Diese Seite drucken

Werbung

Assembly Instructions, Montageanleitung, Montážní návod - SCH-X
A1-12pcs
A2-32pcs
12x40mm
10x40mm
E2-16pcs
E3-4pcs
M8
M10
Attention/Achtung/Pozor:
ENG
Workbench is made of high quality beech wood guaranteeing maximum resistance and long service life.
NOTICE:
The bench must not be left in damp or humid conditions which will cause movement in the wood. Recommended
humidity level max. 60%.
If you bought workbench without surface treatment, we recommend you to finish the bench by colourless varnish or
oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture. Don´t forget to
repeat surface treatment each year including holes for bench dogs.
To increase the stability of your workbench we recommend you to bolt the bench to the floor.
Each 6 months tighten all screws and bolts.
CZ
Výrobek je zhotoven z velice kvalitní bukové spárovky, která zaručuje dlouhou životnost a užitnou hodnotu.
UPOZORNĚNÍ: Výrobek nesmí být vystaven dlouhodobému přímému působení vody či zvýšené vlhkosti, která může
způsobit rozpínavost použitého dřeva. Doporučena vlhkost maximálně 60 %.
DOPORUČENÍ:
Výrobek umístit na místo s relativně stálou vlhkostí maximálně 60%.
Pokud jste si objednali hoblici bez povrchové úpravy, doporučujeme hoblici natřít bezbarvým lakem, včetně spodku.
Lak zamezí absorbování okolní vlhkosti. Povrchovou úpravu opakujte alespoň 1x ročně
Pro zvýšení stability ukotvěte hoblici k podlaze.
Minimálně jednou za 6 měsíců, utáhnout veškeré šroubové spoje.
D
Information - Die Hobelbank ist aus hochwertigem Buchenholz hergestellt. Maximale Beständigkeit und lange
Lebensdauer ist garantiert.
Bitte die folgenden Punkte beachten:
Die Hobelbank nicht in feuchter Umgebung benutzen. Empfohlene Luftfeuchtigkeit max. 60%.
Wenn Sie die Hobelbank ohne Oberflächenversiegelung gekauft haben, empfiehlt es sich, die Bank mit farblosem Lack
oder Öl zu lackieren. Das verhindert das Eindringen von Feuchtigkeit. Den Vorgang bitte alle 6 Monate wiederholen.
Um die Stabilität der Hobelbank zu erhöhen empfiehlt es sich, die Bank auf dem Boden festzuschrauben. Alle 6
Monate bitte alle Schrauben nachziehen.
Ramia s.r.o., Czech Republic, Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
B1-6pcs
B2-8pcs
C1-12pcs
5x90mm
4x20mm
M10x100
F-4pcs
G1-8pcs
Vice
fitting kit
4x40 mm
C2-4pcs
C3-8pcs
D1-80psc
M10x120
M8x100
G2-8pcs
G3-8pcs
G4 - 16pcs
M5x25mm
M5
D2-4pcs
M10
M10
G5 - 4pcs
Vice
attaching
Wooden protectors
wood
8x60mm
E1-12pcs
M10
G6 - 8pcs

Werbung

loading

Inhaltszusammenfassung für RAMIA SCH-X

  • Seite 1 Öl zu lackieren. Das verhindert das Eindringen von Feuchtigkeit. Den Vorgang bitte alle 6 Monate wiederholen. Um die Stabilität der Hobelbank zu erhöhen empfiehlt es sich, die Bank auf dem Boden festzuschrauben. Alle 6 Monate bitte alle Schrauben nachziehen. Ramia s.r.o., Czech Republic, Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...
  • Seite 2 Don´t glue dowels. Dowels have only guiding function. Dübel nicht kleben. Dübel haben nur Führungsfunktion. Kolíky nelepte, mají pouze vodící funkci. Ramia s.r.o., Czech Republic, Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...
  • Seite 3 Ramia s.r.o., Czech Republic, Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...
  • Seite 4 Vices attaching, Schraubstock Montage, Montáž svěráku Bench top with vice cut out (shown upside down) G5 (wooden G4+D1 (screws with protectors) + washers) G1,G2,G3 G6 - vice attaching wood Ramia s.r.o., Czech Republic, Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz...