VITINNI Party Cooler Benutzerhandbuch Seite 8

Care and Cleaning
Warning: To avoid electric shock always unplug your Party Cooler before cleaning
and moving. Ignoring this warning may result in injury.
General: Do not use harsh chemicals, abrasives, ammonia, chlorine bleach,
concentrated detergents, solvents or metal scouring pads. Some of these
chemicals may dissolve damage and/or discolour your Party Cooler.
1. Disconnect the power plug from the wall outlet.
2. Remove the side tables and side baskets.
3. Remove the lid.
4. Remove the contents from the appliance.
5. Remove the detachable bottom.
6. Wipe the inside and outside with a damp cloth. By adding a small amount of
white vinegar to the water you prevent mould and fungus.
7. Clean the detachable bottom and the lid parts with lukewarm water and mild
detergent.
8. Wipe all parts thoroughly after the cleaning.
9. Turn the slits in the sealing ring and in the hinge rubber strip downward when
you assemble the lid.
Important: When the Party Cooler is not in use it must be completely dry and
clean inside to avoid mould growth. Leave the lid open during storage and store
the appliance in a ventilated area standing upright.
6