Before Using The Warming Drawer; Installation - Franke FMY 14 DRW Bedienungsanleitung

BEFORE USING THE WARMING DRAWER

To open and close the drawer, push the middle of the panel as shown in the figure.
At first use, clean the appliance as follows:
- clean the surface with a damp cloth and then dry�
- Preheat the empty drawer for at least two hours: turn the temperature
knob to maximum in order to eliminate any residuals of fat, oil or
manufacturing resins that can create unpleasant odors during the warming
of dishes� Air the room�
- After completing these operations, the appliance is ready for first use�
• Before use, remove:
- stickers placed on the front and door of the warming drawer, except the rating plate;
- keep children away from the product and the packing materials, to avoid interaction with them, if not
properly supervised;
- any stickers from accessories when present�

INSTALLATION

Safety instructions for fitting the warming drawer
IMPORTANT: The drawer must be immediately fixed to the cabinet, following the instructions given below.
The coupled appliance cannot be installed before fixing the drawer to the cabinet.
Fix the drawer as shown in the figure.
Before electrically connecting the appliance, make sure the rating plate
data matches the mains power supply, otherwise the appliance could
become damaged�
Make sure the connection to the power supply is easily accessible after
the appliance has been fitted�
The warming drawer can only be fitted in combination with other
appliances with maximum weight of 60 kg and provided with adequate
cooling ventilation�
To install the appliance that can be combined with the dish warmer, follow the instructions given in the
relevant use and installation handbook�
Important: The same brand coffee maker or combi microwave oven, sized as shown on the following page, can
be installed above the warming drawer� For installation, carefully follow the directions given in the instruction
handbooks supplied with the coffee maker and the combi microwave oven�
4