Operating The Remote Control; Operating The Control Unit & The Remote Control - Skandika Sunna Anleitung

OPERATING THE CONTROL UNIT
Speed

OPERATING THE REMOTE CONTROL

PROGRAM MODES
The program modes P1, P2 or P3 always have a fixed running time of 5 minutes. The speed levels (see below) are
adjusted automatically by the device (each step has a duration of 30 seconds):
P1: 2, 5, 7, 9, 11, 13, 15, 17, 10, 4
P2: 4, 6, 8, 12, 14, 16, 18, 16, 8, 4
P3: 8, 16, 8, 20, 10, 16, 18, 15, 10, 5.
Time On / Off
On / Off
Start / Stop
Increase time / speed
Decrease time / speed
Select program mode (P1, P2 or P3)
Quick adjustment for speed : press once for level 6,
press twice for level 10, press three times for level 16
Speed and time can only be adjusted in manual mode (not in P1, P2 or P3). To start
the unit in manual mode, first switch it on with the
setting is 10 minutes. You can now adjust the time setting (from 1 to 10 minutes).
The speed level can be adjusted from level 1-20. To start or end a training session,
start/stop key. The display „HA" means that time or speed can be adjusted
press the
in this mode.
17
OPERATING THE CONTROL UNIT &
THE REMOTE CONTROL
Increase
speed / time
Start / Stop
Decrease
speed / time
on/off key. The default time