Thermrup HI616-BLU Gebrauchsanweisung Seite 12

4.2 Operating the heated insole
 Please cut carefully along the cutting line of the electric heated
insole depending on the size of the feet. The cutting line on the
insole clearly indicates the suitable size. The rubber heating
element in the insole can be cut, but this does not affect the heat
of the insole.
On/Off Switch, Controller
 Insert the plug of the sole cable into the socket from the battery
bag. Insert the plug from the battery bag into the battery socket.
Place the batteries in the battery bag. You can tie the cable with the
Velcro.
 Place the insole in your boots or shoes. Attach the gaiter around
your leg.
 Press the on / off switch for approx. 1 second to switch on the
heating function. Then briefly press the on / off button (several
times if necessary) to set the desired temperature level (level 1-2-3,
blue-green-red).
The 1st level is the lowest level, the LED indicator lights up green.
The 2nd stage is the middle stage, the LED display lights up blue.
The 3rd stage is the warmest stage, the LED display lights up red.
 Press the on / off switch for approx. 1 second to switch off the
heating function.
*** Please disconnect the battery from the controller after each use to
save the battery. ***
12