Sensor Position And Cutter Position - Japan CBM Corporation Citizen CBM-1000 II Serie Benutzerhandbuch

2.5 Sensor Position and Cutter Position

Manual cutting
position
Auto cutting position
Top print line
Paper end sensor
Label gap sensor
(11mm) (40mm)
Unit: mm
CAUTION
• Observe the following rules on the auto cutter usage:
• Every cut paper should be no less than 10 mm in length. Thin paper strips can cause
paper to jam.
• When cutting a label roll, be sure to cut the base sheet. Never cut labels (tags).
— 13 —