Werbung
Verfügbare Sprachen
Verfügbare Sprachen
06
07
GB
Congratulations with
your purchase!
Package contents - per panel
Magnetic
mounting strips
11208.0x8 - 118 x 44 cm
4
11208.0x9 - 118 x 88 cm
7
11208.0x4 - 198 x 49 cm
6
11208.0x5 - 198 x 98 cm
12
11208.0x2 - 198 x 59 cm
6
11208.0x3 - 198 x 118 cm
12
•
The wall must be smooth (no bumps or dents) and free of obstacles.
•
Magnetic surface of the strip should be completly in contact with back of the
PET -felt panel to have it's full holding power. Always mount magnets in the
same flat plane. With bumpy walls use spacers (available in most D.I.Y. shops) to
put the magnets in the same plane. See image 1.
•
Check flatness between strips by using a level. Adjust with spacers and repeat
check until all surface are in the same plane. See image 2.
•
Provided screws and plugs are suited for solid stone walls. In case of other walls
make sure you choose suited mounting materials! Keep in mind that the screw
head should fit deep enough into the steel plate, because of the magnet!
Image 2
Self adhesive
Screws
Dowels
spacers
8
8
4
14
14
6
12
12
7
24
24
8
12
12
7
24
24
8
Image 1
- Zijaanzicht -
Spacers
✓ ✓
X
Placement of magnetic strips
Start by marking out the positioning of the panels on the back wall. Ensure
that the seams have been fully marked out. This allows the strips to be
fixed in the correct position. The strips on the seams are key to ensure a
smooth transition.
Marking panels
11208.0x9
11208.0x8
*
When used in combination with whiteboard panels, please refer to the assembly
instructions 'Chameleon Modular' (included with the Chameleon Modular whiteboards).
2x Ø 6mm
2x dowel 6mm
2x screw 4x40
± 50 mm
11208.0x5
11208.0x4
11208.0x3
11208.0x2
Magnetic strip
50x300mm
We make it visible
Werbung
