Werbung
CA 115/152 - MANUAL
OWNER´S MANUAL
Dear Musician,
Thank you for purchasing a HK Audio product.
We designed and equipped the CLASSIC LINE active
speaker cabinets so that they are compatible with
virtually all mixing consoles, powered mixers and
conventional passive speakers (without integrated power
amps).
We wish you lots of fun and success,
Your HK Audio team.
CONTENTS
P.2
REAR PANEL
P.3
ENGLISH INSTRUCTIONS
P.4
GERMAN INSTRUCTIONS
P.5
SAMPLE APPLICATIONS
P.6
TECHNICAL SPECIFICATIONS
P.7
SAFETY INSTRUCTIONS
CONTROL FEATURES
MAINS:
Power On/Off. Please switch your mixing console on
before powering up the active cabinets.
AC RECEPTACLE:
Socket for the Euro-mains cord (included).
FUSE:
Fuse holder. Please make certain that replacement fuses
have the same values as the original.
HI CUT (CA 115 only):
This feature switches the integrated 250 Hz low-pass filter
off and on.
Rule of thumb:
HI CUT ON for PA applications,
HI CUT OFF for bass or other instrument amplification
applications.
EXTERNAL SPEAKER:
Jack for additional passive speaker cabinets (without
internal power amps). This output is not affected by the
HI CUT switch. Ensure the extension speaker is rated at 8
ohms or greater.
LINE IN:
This input jack connects to a mixing console's output
signal or the LINE OUT signal from an instrument
amplifier or powered mixer.
THROUGH:
This output jack routes the incoming line signal to
additional active speakers or power amps, if needed.
INPUT GAIN: Controls the input sensitivity for the
incoming line signal. It usually suffices to set this gain
once and leave it; thereafter volume is ordinarily
controlled at the mixing console. Set the INPUT GAIN so
that there is no distortion apparent at dynamic peaks. You
can also use the INPUT GAIN feature to balance volume
levels between individual stage monitors (CA 152) or
control the amount of bass in the overall PA sound (CA
115).
3
Werbung
