Herunterladen Inhalt Inhalt Diese Seite drucken

Umuzi Cleaning UZ-PC-ADP01 Handbuch Seite 5

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Do not short circuit the contacts inside the battery compartment or any batteries.
• Never damage (rechargeable) batteries. Damaging the casing of the device and/or piercing batteries
might lead to explosion or fire!
• Flat AA Alkaline batteries must be removed and disposed of in a safe and environmentally friendly
manner.
• Do not crush, puncture or dismantle the device; this might damage the batteries.
• Do not throw batteries into a fire because they may explode!
• Do not expose the device and batteries to excessive heat sources like fire or direct sunlight.
• Do not dispose of batteries in your household waste. To dispose of the batteries, take them to your local
recycling station. Contact your local government offices for details.
Important information, follow these instructions
• Keep children under strict supervision to prevent them from using the device as a toy.
• Do not allow unsupervised children to clean or maintain this device.
• Only use the device indoors, in dry areas and not in the vicinity of water, other liquids or humidity.
• Do not place the product upside down, as the reservoir content will flow into the main body of the
device!
• Do not use the device if it has fallen into water or any other kind of liquid.
• Never immerse the device in water or any other kind of liquid.
• Do not use the device if it has become faulty, or if it has fallen or become damaged in any way. Send the
device to the manufacturer or the closest qualified service center for inspection.
Cleaning:
• Before cleaning the device, always switch it off.
• Do not use abrasive cleaning solvents to clean the device.
• Clean the exterior of the device with a damp cloth.
• Clean the tank by removing the content and by running warm tap water.
• Clean the spout of the device with clean water to prevent it from blocking up. Repeat this 15 to 20 times.
3) INSTALLING AND USING THE DEVICE
Open the packaging carefully before taking out the device. Make sure the device is complete and
undamaged. If any components are missing or damaged, contact the vendor and do not use the product.
Retain the packaging or recycle it in accordance with local regulations.
locations of the control buttons
A. Spout / Liquid outlet
B. Motion sensor
C. Main body
D. Tank
E. Battery compartment
EN-3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis