Battery And Charger - SXT SCOTEX H10 Handbuch

Driving
3.5 DRIVING PREPARATION
Preparation
1. search for suitable terrain
2. unfold the scooter according to instructions (page 29)
Driving off
1. Press the POWER button to switch on the scooter.
2. Place one foot on the footboard and keep the other foot on the ground.
3. Slowly and carefully press down the right thumb throttle and gently kick the scooter with
the foot left on the ground. Take the second foot off the ground and place it on the footboard as
well. The more the thumb throttle is pressed, the more the scooter accelerates and the faster
the ride.
Braking
1. under normal conditions, the left hand brake is pressed down and the electromagnetic brake
is activated and the scooter slows down immediately and the energy flow to the motor is
interrupted. The harder the brake lever is pressed down, the harder the scooter brakes.
2. The e-scooter has a brake lever attached to the right handle, which can be used to operate
the drum brake on the rear wheel.
Kick start Function
This function is for your safety. When the scooter is to be used, you must kick / propel it with
one foot to start the scooter moving and then press the thumb throttle handle first and the
scooter will start moving with motor power. This protects the engine and prevents the scooter
from accidentally starting to move if the throttle grip is accidentally pressed.
Battery and charging
The options for maximum speed are 10 km/h, 15 km/h, 20 km. This function can be activated or
deactivated via the central control unit according to the user's needs.
Batterie und Ladung
Your e-scooter is equipped with a special lithium polymer battery and a special smart charger.
These accessories, supplied with each scooter, have their own number. Please do not use other
brands of chargers. If the battery or charger is damaged as a result, the warranty will be voided.
32