Scan Setting; Audio Setting - i-box Daybreak Benutzerhandbuch

FM Menu
In FM mode long press the
options available press the enter key
➡
<SCAN SETTING>

Scan setting:

choose <All stations> or <Strong stations only>
If you have a strong signal you may want to choose "strong stations only" to limit
the number of stations found and make sure they have a clear signal.

Audio setting:

In the FM menu press next and enter then choose <Stereo
allowed> or <Forced mono>. If you have a weak signal "Forced mono" may give a
clearer, better balanced sound.
Bluetooth
1. Use the mode key
mode. The Daybreak will search for the last connected device and the Bluetooth icon
will flash.
24
2. If the last connected device is not available. The Daybreak will search for other
devices and will appear in your device's Bluetooth menu as "i-box Daybreak".
3. Select the Daybreak and the "BT" icon will appear in the Daybreak's display when
connection is successful.
➡
Bluetooth
On
Bluetooth devices have been found
AVAILABLE DEVICES
i-box Daybreak
Play audio on your Bluetooth device, see below for playback options on your Daybreak.
Pause/Play
➡
VOL VOL
Volume +
➡
+
www.iboxstyle.com
menu key, then
8
➡
<AUDIO SETTING>
to select Bluetooth make sure your device is in Bluetooth
10
Connect
➡
SCAN
Previous Track
➡
Volume -
➡
-
to enter one of these submenus.
➡
Bluetooth
SCAN
On
1 Bluetooth device is connected
PAIRED DEVICES
i-box Daybreak
Connected
Next Track
➡
Standby
➡
>2s
or keys to see the
4 5
<SYSTEM >
23 45
1
BLUETOOTH
23 45
1
BLUETOOTH
Daybreak | 12