Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Instructions (Translation from Original)
podis
LED MINI 24V DC 5W
LED lighting
Personnel which installs and operates or maintains this device must have read and
understand these instructions
WA R NI N G
• The personnel must be thoroughly familiar with all warnings, notes and procedures
described in these operating instructions.
• Where necessary, safety precautions and safety devices must comply with the applica-
ble regulations.
• Damaged products must neither be installed nor put into operation. In case of a defect,
please return the device to Wieland Electric.
• Connect or disconnect only when de-energized!
• The device may not be opened.
• Do not introduce any objects into the unit!
• Keep away from fire and water!
A T T E NT I O N
• Please avoid to look in the LED-light directly or with an optical equipment. By the
punctually bright light there is a risk of eye damage.
SA F E T Y N O T E S
Evaluation of eye safety acc. to standard CIE S009/E:2002
('Photobiological Safety of Lamps and Lamp Systems')
• The LEDs specified in this data sheet fall into the "low risk" group (relating to devices in
the visible spectrum with an exposure time of 100 s). Under real circumstances (for
exposure time, eye pupils, observation distance), it is assumed that no endangerment to
the eye exists from these devices.
• It should be mentioned that intense light sources have a high secondary exposure
potential due to their blinding effect. As is also true when viewing other bright light
sources (e.g. headlights), temporary reduction in visual acuity and afterimages can
occur, leading to irritation, annoyance, visual impairment, and even accidents, depend-
ing on the situation.
1
Function Description
• LED lighting for wind power plants – wind tower illumination
• 24V DC 5W, white
• DIN EN 60598-1; suitable as emergency lighting acc. to DIN EN 60598-22
• Input X1 revos MINI male, output X2 revos MINI female
2
Block Diagram
X1, X2: revos MINI connectors, x1: PCP terminal
3
Installation Dimensions (Specifications in mm)
4
Connection Configuration
Input X1 male
Output X2 female
Doc.# BA000779 11/2020 (Rev. E)
83.240.0050.0
N O TIC E
Connection assignment
1 +24V
2 GND
3 signal +
4 not connected
5 signal -
PE
podis
Wieland Electric GmbH
Brennerstraße 10-14
96052 Bamberg
Tel.:
+49 (951) 9324-0
Fax:
+49 (951) 9324-198
Internet: www.wieland-electric.com
Email: info@wieland-electric.com
5
Mounting and Connection
Fasten the luminaire to the mounting points provided for this purpose on a flat surface.
Close unused outputs (X2) with a REVOS MIN cover so that the luminaire maintains
protection class IP65.
6
Technical Data
Connection data
Input voltage
Operating current
Fuse
Power consumption
Power supply connection
Output connection
Internal wiring X1, X2
Reverse polarity protection
Operating mode
Emergency lighting character-
ization
LED data
Number of LEDs
LED type
Light color
LED constant current
Luminous flux
Wiring
Life cycle
General data
Ambient operating temptera-
ture t
A
Storage temperature
Cooling
IP rating
Housing
Relative humidity
Chemical quality
Orientation of mounting
Dimensions
Weight
Standards
Emergency light operation
Noise emission
EMC
Climate
CE mark
7
Ordering Information
Accessories
COVER MIN
8
Light Distribution Curve
LED MINI 24V DC 5W
24 V DC (range: 15...30 V DC)
0.2 A
0.5 A / 60 V resetting
4.9 W
revos MINI male
revos MINI female
2
2.5 mm
/ AWG 14
Diode in conjunction with fuse
Continuous operation
Z 1 ****: Emergency lighting in continuous mode with
central power supply
4
High power
White (6000 K)
350 mA
450 lm
Serial
≥ 50.000 h
-40...+70 °C
-40...+70 °C
Free convection
IP 65
PA6.6 (black) and PC (transparent)
10...95 %
free from paint wetting inhibitors, RoHS compliant
any
see 3, „Installation Dimensions"
approx. 320 g
DIN EN 60598-1,
suitable as emergency lighting acc. to DIN EN 60598-22
acc. to DIN EN 55015
acc. to DIN EN 61547
acc. to DIN EN 60068-2-30
EMV directive
07.417.6853.0
EN
Werbung
