Device Layout; Charging The Battery - Samsung EB-U1200 Kurzanleitung

Device layout

USB charger port
Charger port (Type-C)
Indicator light

Charging the battery

Before using the battery pack for the first time, you must charge
the battery.
Connect the battery pack to a charger.
Use only Samsung-approved chargers.
•
You can charge the battery pack using the charger (sold
separately).
•
Depending on the type of charger you are using, you
may need to use the Micro USB connector.
•
The actual capacity (Wh) is measured based on the
battery's output current and voltage. It may differ from
the capacity (Wh) indicated on the device, depending
on the output power condition, the connected device's
circuit configuration, and the operation environment.
•
The charger should remain close to the electric socket
and easily accessible while charging.
•
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
•
When the charger is correctly connected to the battery
pack, the indicator light flashes red, green, and yellow,
and then turns off.
Wireless charging surface
Charging coil
Battery level / Wireless
charging button
5