Operation - Trend R/Stand/A Übersetzung Der Originalanleitung

OPERATION

• Ensure surface is flat before using.
• Ensure the roller and raising mechanism are free from obstruction and moving easily.
• Place the roller at a suitable distance from the mitre saw, depending on the length of the
workpiece to be cut.
• Measure the height of the workpiece from the bench/surface the mitre saw is on.
• Raise the roller to the required height using the height adjuster knob, ensuring it is level with the
underside of the workpiece to be cut.
DOWN
R/STAND/A
UP
-3-
English