Husqvarna QC80 Bedienungsanweisung Seite 8

OPERATION
• Use the battery charger only when the ambient
temperature is between 5 °C (41 °F) and 40 °C (104
°F).
To charge the battery
CAUTION:
battery charger and the terminals on the
battery are clean and dry. Do not put the
battery in the battery charger if it is dirty or wet.
1. Connect the battery charger to a power outlet. The
charging LED flashes 1 time.
TROUBLESHOOTING
Condition
The charging LED is red.
8
Make sure that the battery, the
Possible faults
Permanent battery charger er-
ror.
CAUTION:
charger to a power outlet with the voltage
and frequency specified on the rating plate.
2. Connect the battery to the battery charger. The
charging LED comes on.
3. Remove the battery from the battery charger when it is
fully charged. Push the battery indicator button for
battery status. When all the LED indicators come on,
the battery is fully charged.
4. Pull the power plug to disconnect the battery charger
from the power outlet. Do not pull the power cord.
Possible action
Speak to your dealer.
Only connect the battery
947 - 004 - 01.04.2020