Herunterladen Diese Seite drucken

Monacor TVLCD-400COL Kurzanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

TVLCD-400COL
Best.-Nr. 19.3400
TVLCD-410COL
Best.-Nr. 19.3410
LCD Colour Monitor
GB
1 Operating elements and connections
(see fig. 1 resp. fig. 2)
1 Brightness control
2 Volume control for the headphones (model
TVLCD-400COL) resp. for the inside speaker
(model TVLCD-410COL)
3 Model TVLCD-400COL:
3,5 mm jack for connecting stereo headphones
Model TVLCD-410COL:
inside speaker
4 Power switch
5 Phono audio input (stereo for model TVLCD-
400COL, mono for model TVLCD-410COL) for
connecting to the audio output of the signal source
6 Phono video input for connecting to the video out-
put of the signal source
7 Low voltage jack for connecting the 12 V DC supply
2 Security notes
The unit corresponds to the directive 89/336/EEC for
electromagnetic compatibility.
The unit is only suitable for indoor use.
Protect the unit against humidity and heat (permissi-
ble ambient temperature range 0–40 °C).
The heat being generated in the unit has to be re-
moved via air circulation. Therefore the circulation
vents at the housings must not be covered with any
objects.
Do not insert or drop anything into the air vents! This
could result in a short-circuit.
If the unit is used for purposes other than originally
intended, if it is connected in the wrong way or not
repaired by authorized skilled personnel, there is no
liability for possible damage.
For cleaning only use a dry, soft cloth, by no means
chemicals or water.
Subject to technical change. Copyright © by INTER-MERCADOR GMBH & CO. KG, Bremen, Germany. All rights reserved. 07.98.01
If the unit is to be put out of operation definitively,
bring it to a local recycling plant for disposal.
3 Application range
The LCD colour monitors TVLCD-400COL and TVLCD-
410COL in TFT active matrix technology offer a sharp
and high contrast display. They can be universally
applied, e. g. in surveillance systems, in reverse moni-
toring car systems or for multimedia applications.
Moreover, an additional audio input enables sound
transmission via headphones (model TVLCD-400COL)
or via an inside speaker (model TVLCD-410COL).
4 Installation
The model TVLCD-400COL in a robust metal case is
suitable for mounting into furniture, walls, etc., where-
as the model TVLCD-410COL in a light plastic case
has been designed for mobile application.
a Model TVLCD-400COL
Insert four screws into the mounting holes at the
front panel and mount the device to the desired
location.
b Model TVLCD-410COL
The device can be installed without support or it
can be mounted with the 6.3 mm (
on the bottom side to a bracket. Additionally, the
device has a hinged installation bracket at the rear
panel for tilted installation.
5 Connection
1) Connect the video input (6) with the video output of
the signal source.
2) Connect the audio input (5) - stereo left L and right
R for TVLCD-400COL, mono for TVLCD-410COL -
with the audio output of the signal source.
3) For model TVLCD-400COL: Connect stereo head-
phones to the 3.5 mm jack (3).
4) Connect an electronically regulated 12 V power
supply (e. g. the MONACOR models PS-1204ST or
PS1515ST) to the 12 V DC jack (7). The positive
pole must be connected to the medium contact.
TVLCD-400COL
TVLCD-410COL
A low voltage connector 5.5/2.1 mm (diam. outside/
inside) is required for connection.
6 Operation
1) Switch on the device with the power switch (4).
2) Adjust the brightness control (2) in order to obtain
an image as clear and sharp as possible.
3) Adjust the volume for the headphones (model
TVLCD-400COL) or for the inside speakers (model
TVLCD-410COL) to the desired level with the
volume control (3).
CAUTION: When using headphones do not adjust
a high volume. Permanent high volumes may dam-
age a person´s hearing! The human ear gets ac-
customed to high volumes which do not seem to be
that high after some time. Therefore, do not further
increase a high volume after getting used to it.
7 Technical Data
LDC technology: . . . . . TFT active matrix
Display size: . . . . . . . . Diagonally measured 10 cm
Colour system: . . . . . . PAL
Synchronisation: . . . . . hor. 15 625 Hz, vert. 50 Hz.
1
/
") photo thread
4
Number of pixels: . . . . hor. 480 x vert. 234
Audio level: . . . . . . . . . 1V/10 kΩ
Power supply: . . . . . . . 12 V , 500 mA
Dimensions
TVLCD-400COL: . . Front panel 161 x 120 mm
TVLCD-410COL: . . 150 x 115 x 50 mm
Weight
TVLCD-400COL: . . 550 g
TVLCD-410COL: . . 420 g
According to the manufacturer.
Subject to technical change.
1
2
3
4
1
2
3
4
®
(4")
Panel cutting 145 x 105 mm
Mounting depth 45 mm
L
5
AUDIO
R
6
VIDEO
DC 12V
7
5
AUDIO
6
VIDEO
DC12V
7

Werbung

loading

Diese Anleitung auch für:

Tvlcd-410col