AmazonBasics DVB-T9088A Handbuch Seite 5

Assembly
Step 1:
BACK OF TV
• Connecting: Connect the coaxial cable attached to the antenna to the ANTENNA/CABLE IN
connector on the back of the TV or converter box.
Step 2:
• Setting and Scanning: In the TV's setup menu, set the mode to "Antenna" or "Air", then, set
TV to "Scan" for channels. Consult the TV manual for detailed instructions.
STANDARD 75 ohm
COAX CONNECTION
IMPORTANT!
TV must be a
digital TV to
receive a digital
HD broadcast.
5