Installation; Led Indicator; Connecting Equipment - level one FEP-0811 Schnellinstallationsanleitung

Downloaded from www.Manualslib.com
ENGLISH

Installation

Power
Link/Act

LED Indicator

LED
Indicator
Power
Link/Act

Connecting Equipment

Step1. Inspect the Power Adapter carefully, and make
sure that it is properly connected to a power
source.
Step2. Plug-in the Power Adapter to the Switch.
Step3. Connect your network devices with the switch
by using Ethernet cable. (e.g. Cat-5e)
manuals search engine
SFP
Status Meaning
On Power is on.
Off Power is off.
On Port is connected
Blinking Transmitting / Receiving data
Off Port is not connected
3