7.2. Initial start-up/Change of scent cartridge
For scent change simply unscrew the atomizer from the empty scent canister and
screw it on a new canister. A disconnection of the tubes is not necessary.
(8)
First use (8 & 9):
Connect the one side of the narrow tube to the port (on the backside of the Aro-
maStreamer
) and the other side of the tube to the side of the atomizer. This will
®
provide the connection between the AromaStreamer
fasten the one side of the thick tube above the atomizer (clicksystem) and the other
side on your HVAC channel.
IMPORTANT NOTE:
Place and move the scent canister exclusively upright.
Otherwise it can leak and damage your AromaStreamer
24
(9)
and the scent canister. Now
®
(liquid scent).
®
(AS 950)
X