SW-Motech TraX KFT.00.152.10700.B Kurzanleitung

TraX ® Koffer-Adapterkit für original Givi Kofferträger
TraX ® Sidecase Adapter Kit for original Givi Side Carrier
Montagehinweise
Alle vom Motorrad gelösten Schrauben
sind gemäß Herstellerangaben wieder
zu montieren, oder mit von SW-
MOTECH gelieferten Schrauben zu
ersetzen. Falls nicht anderweitig
definiert, diese Schrauben nach Tabelle
anziehen.
M6 9,6 Nm
Gegebenenfalls Schrauben mit flüssiger
Schraubensicherung einkleben.
Prüfen Sie nach 50 km alle
Verbindungen auf festen Sitz.
SW-MOTECH GmbH & Co. KG
Ernteweg 8/10
35282 Rauschenberg
Germany
Tel. +49 (0) 64 25/8 16 8-00
Fax +49 (0) 64 25/8 16 8-10
info@sw-motech.com
www.sw-motech.com
KFT.00.152.10700/B
Revision: 03
Mounting Instructions
SW-MOTECH products should be
installed by a qualified, experienced
motorcycle technician. If you are unsure
of your ability to properly install a
product, please have the product
installed by your local motorcycle
dealer. SW Motech takes no
responsibility for damages caused by
improper installation.
All screws, bolts and nuts, including
all replacement hardware provided by
SW-MOTECH, should be tightened to
the torque specified in the OEM
maintenance manual for your
motorcycle. If no torque specifications
are provided in the OEM maintenance
manual, the following torques may be
used:
All screws, bolts and nuts should be
checked after driving the first 50 km
to ensure that all are tightened to the
proper torque.
Medium strength liquid thread-locker
(i.e., "Locktite") should be used to
secure all screws, bolts and nuts.