Herunterladen Inhalt Inhalt Diese Seite drucken

For Your Safety; Electrical Safety - Schuller Ehklar Easymix SX30 Gebrauchsanweisung

Farb- und mörtelrührer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB

For your safety

For your safety
General safety instructions
• To operate this machine safely, the user must have read and understood these
instructions for use before using the machine for the first time.
• Observe all safety instructions! Failure to do so may cause harm to you and others
• Retain all instructions for use, and safety instructions for the future.
• Children should be kept at a distance from the machine. Keep the machine out of
the way of children and other unauthorised persons.
• Always ensure that a machine which has been switched off cannot be restarted
unintentionally.
• All parts of the machine, especially safety devices, must be properly installed to
ensure proper operation.
• Retrofitting or making any unauthorised changes to the machine, as well as the use of
unapproved parts are prohibited.

Electrical safety

• The machine must be connected only to a properly installed and earthed mains socket.
• The protection must be made with a residual current circuit breaker (RCCB) with a
calculated residual current of not more than 30 mA.
• Before connecting the machine, it must be ensured that the mains supply corresponds to
the machine's supply requirements.
• The machine may be used only within the given limits of voltage, power, and nominal
rotational speed (see manufacturer's plate).
• Where required, use only extension cables which are suitable for the machine and the
surroundings.
• Never operate the machine in a damp or wet environment.
• Never lift the machine by its cable, or otherwise use the cable for unintended purposes.
• If the mains cable becomes damaged, unplug the machine from the mains immediately.
Never use the machine if the cable or plug is damaged.
• When working with the machine, do not touch earthed objects (radiators, water pipes, etc).
• If the machine is not in use, the mains plug must always be unplugged.
• Before inserting the plug into the mains socket, ensure that the machine is switched off.
• Always switch off the machine before unplugging from the mains.
• Switch the machine off when transporting it.
124
www.schuller.eu

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis