UltraMedia Reflexion DVD362 Benutzerhandbuch Seite 22

Password Setup Page
Password: select the menu password change page.
OSD PASSWORD
NEW PASSWORD
CONFIRM PWD
OK
OSD PASSWORD: Enter the OLD password, (Factory setting is
1369), and the cursor will jump automatically to
NEW PASSWORD.
NEW PASSWORD: Enter the NEW password. Enter 4 digits from
the remote control unit numeric buttons, and the
cursor will automatically jump to CONFIRM PASSWORD.
CONFIRM PASSWORD: Confirm the NEW password by entering
it again. If the confirmation is incorrect, the cursor
will stay in this column. After entering, the correct new password
again, the cursor will jump automatically to OK.
OK: When cursor is on this button, press ENTER key to confirm
setting.
N
Note: If the password has been changed, the parentaland disc
lock code will also be changed.
The default password(1369)is always active even the password
has been changed.
Parameters and specifications
Electronical parameters
Item
Power requirements : AC 100-240 V , 50/60 Hz
Power consumption
: <10W
Operating humidity
: 5 % to 90 %
VIDEO OUT
:2 Vrms (1 KHz, 0 dB)
AUDIO OUT
System
:Semiconductor laser, wavelength 650 nm
Laser
Signal system
: NTSC / PAL
Frequency
: 20Hz to 20 kHz(1dB)
response
:More than 80 dB (ANALOG OUT connectors only)
Signal-to-noise ratio
Dynamic range :More than 85 dB (DVD/CD)
N
Note: Design and specifications are subject to change
without prior notice.
Storage and work circumstances：
1. Storage circumstances Temperature
6 months
1 week
2.Work circumstances
Standard charge
Standard discharge
9
Standard requirement
Humidity
-20 C ~ +45 C 65+20%
-20 C ~ +65 C 65+20%
Temperature Humidity
0 C ~ +45 C 65+20%
-20 C ~ +65 C 65+20%