Ground Zero GZDSP REM 4-8XII-S Bedienungsanleitung Seite 2

GZDSP REM 4-8XII-S
The remote control enables users to adjust the GZDSP 4-8X or XII from the driver´s or passenger´s seat.
In order to enable all features used with GZDSP 4-8X or XII it is necessary to update the MCU firmware
of the DSP unit to version 1.07 available from the web page. Detailed instructions on how to update the
unit are listed in the manual of the GZDSP 4-8X or XII.
LCD display
Rotational and push button
Operation of the
rotational and push button
(in standard mode)
Information on preset mode
It´s recommended to use the latest available software version for the GZDSP unit. Download the latest version from the web page.
The limited warranty for this product is covered by GROUND ZERO´s regional distribution partners and their terms and conditions. For
further information contact your local retailer or distributor
Owner´s manual
Features
In standard mode, rotating the knob counter wise or in opposite direction adjusts the main level
(0-66). Pushing the knob quickly enables the preset mode. Rotating the knob to the desired
preset followed by pushing the knob changes the preset accordingly. Long push of the knob
enables the subwoofer level mode indicated by the flashing display and VOL LED (0-40). Without
further action the standard mode recurs, automatically and the display fades out.
If the display shows 0 in preset mode, there are no presets saved, yet. Without further action the
standard mode recurs, automatically and the display fades out.
Connecting the remote control
Terms of Warranty
Ground Zero GmbH
Erlenweg 25, 85658 Egmating, Germany
Tel. +49 (0)8095/873 830
www.ground-zero-audio.com