Specifications - Makita GN900 Betriebsanleitung

ENGLISH (Original instructions)
1. Battery cartridge
2. Fuel cover
3. Trigger
4. Indication lamp
5. Pusher button
6. Pusher lever

SPECIFICATIONS

Nail length X Shank diameter
Nail collation angle (degree)
Figure of nail head
Dimensions (L X W X H)
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
............. Container under pressure, keep away
from temperatures over 50°C (for ex. sun
radiation) Keep container in a well
ventilated place.
............. Use only outside or well ventilated
rooms. Do not breathe gas.
............. Do not use near flames or sprays on
heated surfaces. In use, may form
flammable/explosive vapour-air mixture.
............. Do not damage, puncture or burn even
after use.
...... Wear safety glasses.
...... Wear ear protection.
............. Keep fingers away from trigger when not
driving fasteners to avoid accidental
firing.
............. Use only in ventilated area to avoid
nausea and unconsciousness. Never use
Explanation of general view
7. Magazine
8. Contact element
9. Hex wrench
10. Button
11. Metering valve
12. Cap
Model
Nail capacity
Net weight
Nail L: 50 mm - 90 mm d: 2.9 mm - 3.3 mm
END107-7
............. Do not use on scaffoldings, ladders.
............. Warning: hot surface!
Cd
Ni-MH
Li-ion
Intended use
The tool is intended for the preliminary interior work such
as fixing floor joists or common rafters and framing work in
2" x 4" housing.
The tool is for high-volume professional application only.
Do not use it for any other purpose. It is not designed to
drive fasteners directly on a hard surface like steel and
concrete.
13. Jet nozzle
14. Screws
15. Hook
16. Filter cover
17. Filter
GN900
40 nails (1strip)
34
Clipped
321 mm X 108 mm X 368 mm
3.3 kg
D.C. 7.2 V
tool in combustible atmospheres.
The tool exhaust may ignite flammable
materials.
Do not touch around this symbol.
Touching the surface may cause burns or
injuries.
.......... Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation in
accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately and
returned to an environmentally
compatible recycling facility.
ENE059-2
5