Functions and Connections:
•
FREQ: Here adjust the cut-off frequency between 50 and 150 Hz from which the subwoofer starts
working.
•
VOL: Here adjust the volume of the subwoofer. It should have the same level as the rest of the system.
•
HI-INPUT: This is the high power input terminal for signals from the car radio which have no cinch
connector terminal.
•
(ST) +12V: The connector for the live wire (red) from the car battery.
•
(ST) ON: Electricity cable to the car radio. When the radio is turned on the subwoofer is on as well.
•
(ST) GND: Grounding the connector for the negative wire (black) from the car battery.
•
0 [] 180: Phase switch changes the directions of vibration of the speaker membrane that all connected
boxes are in tune with each others.
•
L , R: Signal input from the car radio with cinch terminal.
E.T.T. Electronic Toys Trading GmbH Kreuzstraße 65/66 38118 Braunschweig
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
755-084