Seecode QI Serie Anleitung Seite 10

and release the vacuum in the suction foot by pulling firmly on
the rubber lip at the back.
Now connect the USB cable from the scope of delivery to the
mobile phone holder. The other side of the USB cable with the
12 Volt adapter. Now plug this into the cigarette lighter socket
in the vehicle. As soon as the cradle is connected to power, a
green LED lights up on the side.
wireless charging process begins. When the charging process
starts, the green LED goes out and a blue LED lights up.
10
Now you can clamp your
mobile phone in the holder.
As the two jaws of the mobi-
le phone holder are clamped
automatically, you have to
pull them apart to insert your
mobile phone.
As soon as the back of the
mobile phone rests on the
mobile phone holder, the