Safety Precautions - AutoDia SX45 Pro Bedienungsanleitung

SAFETY PRECAUTIONS

To avoid body hurt and damage to the device or to your car, please read this
manual carefully before using AutoDia SX45 Pro The general testing process
described in this manual is got by technologist of experience. Safety precaution is
required in most of the process to avoid body hurt and damage to the device or
your car.Prior to your using this device, please read vehicle maintenance code
and follow the safety precautions. Keep mention to the following general safety
precautions.
It generates CO and other poisonous air when engine run. To avoid this kind of
hurt, please repair the car in a well-air-ventilated location.
When an engine is running, many parts (such as the coolant fan,pulleys, fan belt
etc.) turn at high speed. To avoid serious injury,always be aware of moving parts.
Keep a safe distance from these parts as well as other potentially moving objects.
Engine parts become very hot when the engine is running. To prevent severe
burns, avoid contact with hot engine parts.
Connecting or disconnecting test equipment when the ignition is ON can damage
test equipment and the vehicle's electronic components. Turn the ignition OFF
before connecting the AutoDia SX45 Pro to or disconnecting the AutoDia SX45
Pro from the vehicle's Data Link Connector (DLC).
Fuel and battery vapors are highly flammable. To prevent an explosion,keep all
sparks, heated items and open flames away from the battery and fuel/ fuel
vapors. Do not smoke near the vehicle during testing.
EN
15