R-Go Zepher C2 Handbuch Seite 16

6
Step 6b
In order to straighten the
monitor, you will find 3 screws
at the back of the VESA
6
plate . The screws can be
tightened with the enclosed
hex key, so you can increase
the resistance and straighten
the monitor.
Step 6c (Only for R-Go Caparo 4 D2)
Depending on the weight of your monitor, you can
increase or decrease the resistance of the gas spring
4
arm (upper arm ) by tightening the hexagonal
screws. Use the enclosed hex key.
4
16