Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Patch panel CAT6A
Item no. 1676578 (8 port)
Item no. 1676577 (12 port)
Intended use
The product is intended for cabling of rigid network lines in accordance with CAT6A standards.
This then makes the connection of conventional patch cables to the RJ45 sockets possible.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, the product may be damaged. Further-
more, improper use can cause risks such as short-circuits, fire, etc. Please read the operating
instructions carefully and do not discard them. If you pass the product on to a third party, please
hand over these operating instructions as well.
This product complies with the applicable National and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Patch panel
• Mounting material (screws, dowel, cable tie)
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown here. Please follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating
manual which must be adhered to.
The arrow symbol is used to indicate where specific tips and information on handling
are provided.
Safety instructions
Please read the operating instructions carefully and pay particular attention to
the safety instructions. We do not assume liability for injuries/material damag-
es resulting from failure to observe the safety instructions and the information
in these operating instructions regarding the proper handling of the product.
Furthermore, in such cases, the warranty/guarantee will be null and void.
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly cast aside the packaging material. It may become a dangerous
plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damages,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• Please handle the product carefully. The product can be damaged if crushed,
struck or dropped, even from a low height.
• If you have doubts about how the equipment should be operated or how to safely
connect it, consult a trained technician.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialist workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
Connection and installation
• Remove the cover. To do this, turn the two clamping knobs to the left or to the right. After that
the cover can be folded backwards up and removed.
• Carefully cut into the cable jacket of the network cable at 50 mm. Do not damage the shield-
ing and the inner conductor!
• Pull off the cable jacket.
• Pull the braided shielding backwards over the cable jacket and twist. Remove the shielding
of the conductor pairs.
• In the patch panel, undo the associated metal bracket for the cable relief of the corresponding
port to where you intend to connect the cable.
• For cabling use either the colour coding according to T568A or T568B (in Europe T568A is
usually used). Do not mix the two colour codes on your network, or otherwise the network
connections may not work.
Guide the shielding of the two cable pairs of the cable to the insulation displacement con-
nectors.
Pin
T568A
1
White/Green
2
Green
3
White/Orange
4
Blue
5
White/Blue
6
Orange
7
White/Brown
8
Brown
• Connect the leads (starting with insulation displacement connector 8) with a suitable punch
down tool. Pay attention to the correct colour coding.
• Connect the network cable to the cable relief so that the braided shielding is seated under the
cable relief and a contact is made.
Do not use force; do not jam the cable.
• Finally fixate the network cable with the cable tie at the very end of the patch panel. Do as
described above for other network cables.
• Once all the cables are connected, put the cover on again. Fasten the cover with the two
clamp knobs.
• By means of the two openings at the bottom side and two screws you can hang the patch
panel on a wall for example. Depending on the existing surface type, use appropriate screws
and, if necessary, dowels.
• Attach the ground cable of the patch panel to a dedicated earth connector.
• Label the cables and network ports on the patch panel in a suitable way, so that in case of
faults you can better control the ports and cable connections.
Care and cleaning
• Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these
could damage the enclosure or even impair operation.
• Use a dry, lint-free cloth to clean the product.
Disposal
The product must not be disposed of with the household waste. Dispose of an un-
serviceable product in accordance with the relevant statutory regulations.
Technical data
Item no.
Ports
Network Standard
Environmental conditions
Dimensions (W x D x H)
160.3 x 100.8 x 44.45 mm
Weight
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2018 by Conrad Electronic SE.
T568B
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
1676578
1676577
8
CAT6A
Temperature: -10 °C to +60 °C,
air humidity 10% to 85% relative, non-condensing
218 x 100.8 x 44.45 mm
556 g
1676577_78_V2_0718_02_VTP_m_en
12
742 g
Werbung
