ESX VNA-RCAM-KIT110 Installationsanleitung Seite 4

VNA-RCAM-KIT110
Distant View Upgrade Kit for VNA-RCAM-DBJ110/115
INSTALLATION GUIDE
Remove the cover plug on the right of the
housing of VNA-RCAM-DBJ110/115.
Position the upgrade camera from behind
through the opening on the housing.
Use the included screws to secure the
mounting bracket. Fully tighten the screws
until the bracket flexes around the camera.
ESX CAR MEDIA SYSTEMS / AUDIO DESIGN GMBH · AM BREILINGSWEG 3 · D-76709 KRONAU · WWW.ESXNAVI.DE
Stick the enclosed plastic seal onto the
enclosed retaining bracket.
When aligning, make sure that the white
marking is facing down when you put on
the retaining bracket.
Then connect the two camera cables to the
included Y-adapter. The upgrade camera
must be connected to CH2 and the camera
from VNA-RCAM-DBJ110/115 to CH1.