Mic In; Echo; Light - Earise M15 Benutzerhandbuch

MIC IN

1. The speaker has two 1/4" AUX jacks for more microphones: MIC1, MIC2.
2. If connected to wired microphones, simply connect via the "MIC1"
/"MIC2" jacks. You can connect up to 2 wired microphones. So you
can use 4 mics at the same time (including 2 original mics).
3. If connected to wireless microphones, simply connect the wireless
receiver via the "MIC1"/"MIC2" jack. You can connect up to 4 wireless
microphones. So you can use 6 mics at the same time (including 2
original mics).
4. Please note that the frequency of the wireless microphones cannot
be the same as the original microphones', otherwise it will interfere
with the original microphones.

ECHO

1. Turn on the microphones, adjust the "ECHO" knob to select the
intensity of the reverb, there are 4 levels: E00, E01, E02, E03. E00
is off, and E03 is the strongest.
2. Please note that the reverb only works for the microphones, it doesn't
work on the background music.

LIGHT

1. The light is default on. Press and hold the "LIGHT" button to turn
off the light.
2. Press the "LIGHT" button to choose a light mode.
04
M15