Seite 1
Einbauanleitung Tieferlegungssatz für Ausführung MP1 Für Harley-Davidson Milwaukee-Eight Softail Modelle ab Bj. 2018 Artikelnummer: 130-30 Passend für folgende Motorräder: · FXBR(S) Breakout® · FLSB Sport Glide® · FXDR 114 Softail® · FXFB(S)/FXBS Fat Bob® (nur 25mm · FLFB(S) Fat Boy® möglich) Das Tieferlegungssystem der Müller Motorcycle AG erfüllt in jeder Postion der Tieferlgung die gesetzlichen Vorgaben des KBA!
Seite 2
Umrüstsatz MP1 – Art.-Nr. 130-30 besteht aus spez. Tieferle- 4. Spannen Sie den Dämpfer soweit gerauge mit Lagerung, Gewindeadapter und Federscheibe. vor, bis Sie an die Sechskantmutter des Federbeinauges gelangen. Für die Montage benötigtes Spezial- werkzeug: 5. Erhitzen Sie das Ferderbeinpresse Federbeinauge mittels (wir empfehlen die...
Seite 3
8. Stecken Sie den 11. Nehmen Sie das Anschlag wieder auf neue Dämpferauge die Dämpferstange. (Pos. 2) und schrauben Sie es bis auf Anschlag auf den Gewindeadapter (Pos. 4) und kontern Sie das Dämpferauge (Pos. 2) mit der Feder- !!! Achtung, nun kommt des zur eigentlichen Einstellung der Höhe !!!! scheibe (Pos.
Seite 4
Conversion kit MP1 – Art.-Nr. 130-30/1304-065 includes a 4. Preload the damper as far as you lowering eye with bearing, thread adapter and a spring washer. reach the hexagon nut of the strut eye. Special tools needed 5. Heat up the strut eye for mounting: with a heat gun and Spring compressor...
Seite 5
8. Put the rubber stop 11. Take the new back on the damper rod. lowering eye (Pos. 2) and screw it all the way onto the thread adapter (Pos. 4) and counter secure the lowering eye (Pos. 2) with the spring !!! Attention, now we get to the actual height adjustment !!!! washer (Pos.