Inhaltsverzeichnis
Werbung
2. Carefully lay the disk drive into the drive tray, so that the screw
3. Insert the screws through the holes in the drive carrier and into the
Downloaded from
www.Manualslib.com
holes on the sides of the carrier align with the screw holes in the
drive.
sides of the disk drive.
Install only the counter-sink screws supplied with the
․
SmartStor.
Install four screws per drive.
․
Snug each screw. Be careful not to over-tighten.
․
manuals search engine
9
Werbung
Inhaltsverzeichnis
