Getting Started-Windows - j5 create juc400 Benutzerhandbuch

WORMHOLE SWITCH

GETTING STARTED-Windows

Follow the steps below to start the application:
1. Connect one end of the Wormhole Switch to a standard USB
port on one of the two computers. And connect the other end of
the Wormhole Switch to a USB port on the second computer.
(Please see the pictures below)
2. The device will automatically start the Wormhole Switch software
installation on both computers.
3. An "AutoPlay" option window may appear. Please click on the option
"Run WKMLoader.exe"
Troubleshooting:
If auto-run is not launched, please follow the steps:
Downloaded from www.Manualslib.com manuals search engine
USER MANUAL
12